The material information have partly been selected because of specific needs from a source for which the starting formulation has been designed.
Ask the raw material supplier to request Technical Data Sheet (TDS) and Material Safety Data Sheet (MSDS).
(1) cellulose thickener
Appearance : slightly yellowish powder
Particle size : 99,9% through 35 mesh
Bulking value : 0.7 - 0.75 Kg/L
Vicosity : 2600-3300 cps (#3,30rpm).
In order to develop its viscosity it is necessary to rise the solution pH up to 8.0
(2) Control pH
Appearance : colorless to light yellow liquid
Density (Kg/L): 1.02 +/- 0.01
pH ( 100% ) : 13.0 +/- 0.5
pH ( 0.5% in water) : 11.0 +/- 0.5
Odor : low odor like amine.
(3) Dispersing
Appearance : colourless to light yellow liquid
Type : polymeric
Active matter : 39 %
pH : 7.5-8.5
Density : 1.33 g/ml.
(4) Wetting
Type : nonionic
Appearance : clear liquid
Active content : 99-100%
pH (2% solution in water) : 5 - 7
Acid value : max 0.2 mg KOH/gr.
(5) Defoamer
Base : mineral oil, with silicon added
Active matter : 99-100%
Density : 845-875 g/L.
(6) Preservative
In can preservative
Composition : mixture of CMIT and MIT
Appearace : clear - yellow liquid
pH (0.2% in water) : 1 - 3
Light stability : stable
pH compatibility : 2 - 9
Density : 1.26 - 1.30
(7) Titanium dioxide
Type : rutile
TiO2 content : min 93%
Oil Absorption (g/100g) : max 22
Density (g/mL) : 0.4
Sieve residue (325 mesh) max : 0.02%
Average partice size (micron) : 0.31
Surface treatment : zirconia & alumina, organic.
(8) Calcium carbonate (CaCO3)
1200 mesh
Specific grafity kg/L : 2.7
Brightness : 93
Oil absorption (g/100g) : 19
Bulk density g/mL : 0.8
(9) Calcined kaolin
Brightness % : min 93.5
Particle size (0-2micron) % : 80+/-2
Oil absorption (g/100g) : 60+/-5
Bulk density (g/L) : 330
Specific grafity g/L : 2600
(10) vinyl acrylic
Appearance : milky white
Solid content (% weight) : 55 +/- 1
Viscosity (cps,#4,rpm60) : 1000-4000
pH : 4-5
TG : +23°C
(11) Coalescing
Type : TMB
Molecular weight (g/mol) : 216
Specific grafity : 0.948
(12) HASE THICKENER
Ionic type : anionic
Appearance : off white, milky liquid
Solid, weight% : 30
pH as supplied : 3-4
Density (kg/liter): 1.06
(13) HEUR THICKENER
Ionic type : nonionic
SeAppearance : hazy liquid
Solid, weight% : 20
pH as supplied : 6-8
Density (kg/liter) : 1.04
(14) ASE THICKENER
Ionic type : anionic
Appearance : white milky liquid
Solid, weight% : 28
pH as supplied : 2.5-4
Density (kg/liter) : 1.06
(15) wetting
Type : nonionic
Appearance : clear to yellowish liquid
Active content : 99-100%
pH (5% solution in water) : 7-8
Density : 1.022-1.028 g/ml
Hydroxyl value : 73-83 mgKOH/g.
(16) wetting
Type : polymeric
Appearance : clear to yellowish liquid
Active content : 80+/-0.1 %
pH (10% solution in water) : 6.5-7.5
Density : 1.03+/-0.005 g/ml.
(17) Preservative
Dry film preservative
Appearace : off white liquid
pH (0.1% in water) : 8
Light stability : stable
pH compatibility : 4-10
(18) Calcium carbonate
1000 mesh
Specific grafity kg/L : 2.7
Brightness : 89
Oil absorption (g/100g) : 19
Bulk density g/mL : 0.96
(19) Amorphous aluminium silicate
BET specific surface area (m2/g) : 70
Particle size (micron) : 6
Tamped density (g/L) : 250
pH (5% in water) : 10.5
(20) Styrene acrylic
Appearance : milky white
Solid content (% weight) : 50 +/- 1
Viscosity (cps,#4,rpm60) : 4000-9000
pH : 7.5-9
TG : +8°C
Density (g/ml) : 0.82-0.83
(21) Veova
Appearance : milky white
Solid content (% weight) : 49 +/- 1
Viscosity (cps,#2,rpm60) : 50 - 250
pH : 5-7
TG : +22°C
(22) Acrylic
Appearance : milky white
Solid content (% weight) : 48 +/- 1
Viscosity (cps,#4,rpm60) : 1000-2000
pH : 8-9
TG : +60°C
(23) Acrylic
Appearance : milky white
Solid content (% weight) : 50 +/- 1
Viscosity (cps,#4,rpm60) : 500-2500
pH : 7.5 - 8.5
TG : +18°C
(24) LIGHT STABILIZER
Appearance : yellowish liquid
Density (g/ml) : 0.96
Solubility (g/ml in water) : 30
(25) PIGMENT YELLOW 83
Type : Diarylide yellow
Density (g/ml) : 1.6
Oil absorption (ml/100g) : 58
(26) PIGMENT BLUE 15:3
Type : Cu-phthalocyanine blue
Density (g/ml) : 1.6
Oil absorption (ml/100g) : 42
(27) PIGMENT RED 112
Type : Naphtol AS
Density (g/ml) : 1.7
Oil absorption (ml/100g) : 54
(28) PIGMENT GREEN 7
Type : Cu-phthalocyanine green
Density (g/ml) : 2.3
Oil absorption (ml/100g) : 38
(29) PIGMENT RED 101
Type : synthetic iron oxide
Density (g/ml) : 5.1
Oil absorption (ml/100g) : 22
(30) PIGMENT YELLOW 42
Type : synthetic iron oxide
Density (g/ml) : 4.1
Oil absorption (ml/100g) : 35
(31) CROSSLINKER
Appearance : clear viscous liquid
Specific gravity : 0.979 g/ml
Flash point (°C) : 104.
(32) ZINC PHOSPHATE
Appearance : non hygroscopic white powder
Density (g/ml) : 3.1
Oil absorption (ml/100g) : 25
(33) BENTONITE
Appearance : creamy finely powder
Density (g/ml) : 1.9
Bulk density gr/ml : 0,35
(34) DRIER
Appearance : blue - violet liquid
Composition : mix of cobalt, zirconium, calcium
Specific gravity : 0.975 g/ml
Flash point (°C) : 58
(35) MATTING AGENT
Appearance : white powder
Particle size : 6 micron
hi
Silica content (%) : 98
Oil absorption : 240 - 280
Bulk density : 90 - 110
(36) OPAQUE POLYMER
Appearance : milky white
Solid content : 30 +/- 1
pH : 8.5 - 9.5
(37) PETROSIN
Appearance : light yellow granular
Softening point : 115 - 120°C
Acid mg KOH/g : 0.1
(38) Dispersing
Appearance : slightly hazy liquid
Active matter : 70 - 75 %
Density (kg/L) : 0.95
Flash point (°C) : 40
(39) ANTI SKINNING
Appearance : colourless liquid
Type : MEKO
Specific gravity (kg/L) : 0.92
Flash point (°C) : 60
(40) LONG OIL ALKYD
Oil type : soya bean oil
Non volatile : 69 - 71 %
Density : 0.96 kg/L
Flash point : 32°C
(41) MEDIUM OIL ALKYD
Oil type : soya bean oil
Non volatile : 59 - 61 %
Density : 0.96 kg/L
Flash point : 32°C.
(42) LEVELLING AGENT
Leveling agent with air release properties.
Appearance : clear, colourless liquid
Aplication : solvent-base coating
Density : 0.925 g/ml
Solid content : 97%
Flash point : 135°C
(43) ALKYD MODIFIED PHENOLIC RESIN
Oil type : linseed oil
Modifier : rosin phenolic
Solvent type : xylene
Non volatile : 70 +/- 1%
Compatability
Long oil alkyd : incompatible
Medium oil alkyd : very limited
Short oil alkyd : complete
(44) MEDIUM OIL AKLYD FAST DRYING
Appearance : clear viscous liquid
Oil type : soya bean
Oil length : 45%
Non volatile : 58+/-1
(45) THERMOPLASTIC ACRYLIC RESIN
Appearance : clear transparant liquid
Non volatile (%) : 50+/-1
Solvent type : xylene/pegasol
TG (°C) : 40
(46) BARIUM SULFATE
synthetic barium sulfate
BaSO4 : 99%
Appearance : white powder
Oil abaorption : 15 g/100g
(47) PIGMENT BLACK OXIDE
Color index : pigment black 11
Oil absorption (g/100g) : 20-25
Density g/ml3 : 4,5-4,7
(48) MICA
Particle size : 3.5 micron
Oil absorption (g/100g) : 50
(49) ANTI SETTLING
Appearance : yellowish liquid
Density (g/cm3) : 1
Flash point (°C) : 40
(50) DISPERSING
Appearance : yellowish liquid
Density (g/cm3) : 0.9
Flash point (°C) : 68
Solid content : 45-47%
Acid value mg KOH/g : 55 - 58
(51) DEFOAMER
Type : Silicone free
Appearance : yellowish liquid
Density (g/cm3) : 0.82
Flash point (°C) : 32
Solid content : 26%
Acid value mg KOH/g : 55 - 58
(52) DEFOAMER
Type : Silicone contain
Appearance : yellowish liquid
Density (g/cm3) : 0.87
Flash point (°C) : 46
(53) MELAMINE RESIN
Type : melamine formaldehyde
Solvent : isobutanol
Appearance : transparant liquid
Non volatile : 61+/-1 %
(54) FUNCTIONAL ACRYLIC RESIN
Type : acrylic resin
Solvent : N-butanol
Appearance : transparant liquid
Non volatile : 51+/-1 %
Acid value mg KOH/g : 12
(55) FUNCTIONAL ACRYLIC RESIN
Type : acrylic resin
Solvent : xylene
Appearance : transparant liquid
Non volatile : 62+/-1 %
Acid value mg KOH/g : 4-9
Viscosity (25°C, Gardner-Holdt) :
Z3-Z5
OHV (mgKOH/g) : 80+/-5
(56) PU CROSS LINKER (HARDENER)
Type : with NCO base
Compatibility : alkyd polyol, acrylic polyol
Solvent : ethyl acetate
Appearance : vlear yellowish viscous liquid
NCO content : 12.5+/-0.3%
Non volatile : 75+/-1 %
(57) TALCUM
pH (10% slurry) : 8-10
SiO2 : min 62%
Surface area : 1.5 m2/g
Particle size : 5 micron
(58) EPOXY RESIN
Type : Bisphenol A
Solvent : xylene
Appearance : transparant viscous liquid
Non volatile : 74 - 76%
Equivalent weight (g/eq) : 450-500
(59) EPOXY HARDENER
Amine value mg KOH/gr : 238
Theoretical amine hydrogen equivalent weight : 198
Mix ratio with 190 EEW Solid Epoxy : 104
Density : 0.97 kg/L
Flash point : 90
Specific gravity : 1.19
(60) FUMED SILICA
Specific surface area (BET) : 190-230 m2/g
Bulk density : 50 g/L
SiO2 : > 99.9%
(61) CALCIUM 5
Appearance : yellow liquid
Calcium content (% wt/wt) : 5.00
Specific gravity (25°C, kg/L) : 0.88
Flash point : 42°C
(62) ZIRCONIUM 12
Metal content (% wt/wt) : 12
Specific gravity (25°C, kg/L) : 0.97
Flash point : 40°C
(63) COBALT 8
Appearance : violet liquid
Cobalt content (% wt/wt) : 8.00
Specific gravity (25°C, kg/L) : 0.92
Flash point : 42°C
(64) EPOXIDIZED SOYBEAN OIL
Molecular weight : 1000
Freeze point : 0°C
Specific gravity (25°C) : 0.99
Fire point : 315°C
(65) DIOCTYL PHTHALATE / DOP
Boiling point (°C) : 231
Specific gravity (25°C) : 0.98
Flash point : 218°C
(66) POLYVINYL CHLORIDE / PVC
K Value : 80
Apparent bulk density : 0.4 g/cm3
Sieve analysis (retained on 0.04 mm) : < 1%
(67) WAX EMULSION
An aqueous emulsion of a montan based wax
Appearance : white emulsion
Emulsion type : nonionic
Softening point (°C) : 85
Density (g/cm3) : 1.01
Solid content (%) : 18-20
(68) WAX
Montan wax
Chemical characterization : acid wax
Appearance : yellowish flake
Acid value (mg KOH/g) : 12
Drop point (°C) : 85
Density (g/cm3) : 1
Saponification value (mg KOH/g) : 154
Viscosity at 100°C (mPa.s) : 20
(69) WAX
Montan wax
Chemical characterization : ester wax
Appearance : yellowish flake
Acid value (mg KOH/g) : 17
Drop point (°C) : 80
Density (g/cm3) : 1.01
Saponification value (mg KOH/g) : 151
Viscosity at 100°C (mPa.s) : 30
(70) EMULSIFIERS
Fatty acid esters
Appearance : yellowish liquid
Type : nonionic
Chemical : oleic acid polyglycerol ester
pH (1% in water) : 7
(71) LAWS
Low aromatic white spirit
Typically boiling point (°C) : 150-220
Density (15°C) : 0.775 kg/L
Flash point : 37°C
Aromatics (% v/v) : 20
Benzene mg/kg : < 10
Aniline point (°C) : 51
(72) SILICONE FLUID 350cSt
polydimethylsiloxane
Appearance : clear liquid
Viscosity at 25°C (cSt) : 350
Flash point (°C) : >300
Density (g/cm3) : 0.967
(73) SILICONE FLUID 1000cSt
polydimethylsiloxane
Appearance : clear liquid
Viscosity at 25°C (cSt) : 1000
Flash point (°C) : >320
Density (g/cm3) : 0.969
(74) SILICONE FLUID 10000cSt
polydimethylsiloxane
Appearance : clear liquid
Viscosity at 25°C (cSt) : 10000
Flash point (°C) : >320
Density (g/cm3) : 0.969
(75) SILICONE FLUID 12500cSt
polydimethylsiloxane
Appearance : clear liquid
Viscosity at 25°C (cSt) : 12500
Flash point (°C) : >320
Density (g/cm3) : 0.969
(76) RHEOLOGY MODIFIER
Cross-linked acrylic acid homopolymer
Appearance : white powder
pH (aqueous dispersion) : 2.5-3.7
Viscosity (0.5 wt %, mPa.s) : 50000-70000
(77) PRESERVATIVE
Non formaldehyde-releasing, for personal care products
Based on isothiazolinone
Appearance : clear colorless liquid
Density (g/ml) : 1.09
pH (10% in water) : 4 - 5.8
(78) OMS
Odorless mineral spirit
Boiling point (°C) : 173
Density (15°C) : 0.760 kg/L
Flash point : 44°C
(79) DISPERSING
Highly concentrated liquid dispersing agent for inorganic solvent-based system
Appearance : clear liquid
Active matter : 100%
pH, 1% solution in water : 5-6
Density (20°C) : 1039 kg/m3
Viscosity (25°C, mPa.s) : 1100
Solubility : soluble in water and most organic solvents
Flash point : 98°C
Ion character : anionic
(80) STYRENE ACRYLIC
Water-based dispersion of polystyrene acrylic copolymer for flexible cementitious water proofing, compatibility with cement
Appearance : milky white liquid
Viscosity at 30°C (cPs) : 1000-5000
pH : 8 - 9.5
(81) WATER REPELLENT
An aqueous solution of potassium methyl siliconate, for impragnation of materials to make them water repellent
Appearance : clear liquid
Solid content (wt, %) : 54
Active substance (wt, %) : 32
Solvent : water
pH (25°C) : 13-14
Density (g/cm3) : 1.4
(82) SILVER PEARL PIGMENT
the pigment is in layer structure, it can only be mixed slightly when mixing. Avoid the strong mechanical treatment.
Particle size micron : 10-60
Luster : bright Reflected
color : white
Weatherability °C : < 800
Density g/cm3 : 3.05
Bulk density g/100mL : 18
Oil adsorption : 70
Mica : 70
TiO2 : 30
Fe2O3 : -
SnO2 : <1
(83) GOLD PEARL PIGMENT
The pigment is in layer structure, it can only be mixed slightly when mixing. Avoid the strong mechanical treatment.
Particle size micron : 10-60
Luster : bright
Reflected color : gold
Weatherability °C : > 800
Density g/cm3 : 3.15
Bulk density g/100mL : 28
Oil adsorption : 60
Mica : 58
TiO2 : 22
Fe2O3 : 21
SnO2 : <1
(84) STYRENE BUTADIENE
Styrene butadiene dispersion for modifying hydraulic binder systems, particularly cement mixes.
Appearance : milky white liquid
Solids content % : 51
pH value : 7.8-10.0
MFFT °C : 16
Particle size : 0.2 micron
Density g/cm3 : 1.01
Type of dispersion : anionic
Plasticizer content : plasticizer-free
(85) VAE REDISPERSIBLE POWDER
It is a water-redispersible vinyl acetate/ethylene copolymer powder, especially recommended for blending with inorganic binder such as cement, gypsum and hydrated lime.
Polymer type : vinyl acetate-ethylene copolymer
Appearance : white powder
Protective colloid : polyvinyl alcohol
Bulk density (g/ml) : 0.45
Average particle size (micron) : 85
(86) METHYLCELLULOSE / MC
For water retention capability even in "long times", by allowing to prepare a mixture that can be used also along time after its preparation, without the need to add water or a re-homogenization.
Appearance : white powder
Odour : odourless
Bulk density : 350 kg/m3
Solubility in water (20°C) : soluble
Viscosity (dynamic)(20°C, 20g/L in water) : 40000 mPa.s
(87) HYDROXYETHYL METHYL CELLULOSE (HEMC)
For cement-base applications, as rheology modifier/thickener
Appearance : powder
Solubility : water soluble
Viscosity (2% solution in water) : 35000-45000 mPa.s
(88) FOAM CONTROL
Foam control agent for use in powder systems
Appearance : white powder
Type : blend of hydrocarbon, surfactant, amorphous silica
Ionic : non ionic
(89) SUPERPLASTIZER
For workability without an increase in water content, mechanical properties of cement
Chemical : melamine sulfonate formaldehyde, neutralized with sodium
Appearance : yellowish powder
pH (10% in water) : 9
Sulfate Concentration(%) : 1.5
Bulk density : 0.7
(90) RHEOLOGY MODIFIER
Rheology modifying agent for cement based that provides anti slip and non sag properties.
Appearance : white powder
Type : modified natural polymer
Bulk density : 700 kg/m3
Moisture content : 30-70 mg/g